Honeywell L5200 Series Installation And Setup Guide

LYNX Touch Installation and Setup Guide
- 71 -
LYNX Touch (L5200/L7000) Programming Default Values
Program Function Configuration 1 Configuration 2 Configuration 3 Configuration 4
Secondary CS info
Phone Type None
None None
None
Communicator Type None None None None
Phone Number
Blank Blank Blank Blank
Account Number FFFF FFFF FFFF FFFF
Dynamic Priority None None None None
Dynamic Delay None None None None
Report All Press to Report All Press to Report All Press to Report All Press to Report All
Report Alarms Enabled Enabled Enabled Enabled
Report Troubles Enabled Enabled Enabled Enabled
Report Open/Close Disabled Disabled Disabled Disabled
Report Tests Enabled Enabled Enabled Enabled
Follow Me Phone 1 (L5200 only)
Phone Type (L5200 only) None None None None
Phone Number (L5200 only)
Blank Blank Blank Blank
Report All (L5200 only) Press To Report All Press To Report All Press To Report All Press To Report All
Report Alarms (L5200 only) Disabled Disabled Disabled Disabled
Report Troubles (L5200 only) Disabled Disabled Disabled Disabled
Report Open/Close (L5200 only) Disabled Disabled Disabled Disabled
Report Tests (L5200 only) Disabled Disabled Disabled Disabled
Follow Me Phone 2 (L5200 only)
Phone Type (L5200 only) None None None None
Phone Number (L5200 only)
Blank Blank Blank Blank
Report All (L5200 only) Press To Report All Press To Report All Press To Report All Press To Report All
Report Alarms (L5200 only) Disabled Disabled Disabled Disabled
Report Troubles (L5200 only) Disabled Disabled Disabled Disabled
Report Open/Close (L5200 only) Disabled Disabled Disabled Disabled
Report Tests (L5200 only) Disabled Disabled Disabled Disabled
Report Selection
Arm Away Enabled Enabled Enabled Enabled
Arm Stay Enabled Enabled Enabled Enabled
Disarm Enabled Enabled Enabled Enabled
Exit Error Enabled Enabled Enabled Enabled
Recent Closing Enabled Enabled Enabled Enabled
Event Log Full Enabled Enabled Enabled Enabled
Trouble Enabled Enabled Enabled Enabled
Trouble Restore Enabled Enabled Enabled Enabled
Alarm Restore Enabled Enabled Enabled Enabled
Alarm Cancel Enabled Enabled Enabled Enabled
Test Enabled Enabled Enabled Enabled
Test Restore Enabled Enabled Enabled Enabled
Bypass Enabled Enabled Enabled Enabled
Bypass Restore Enabled Enabled Enabled Enabled
AC Loss Enabled Enabled Enabled Enabled
AC Loss Restore Enabled Enabled Enabled Enabled
Low Battery Enabled Enabled Enabled Enabled
Low Battery Restore Enabled Enabled Enabled Enabled
RF Low Battery Enabled Enabled Enabled Enabled
RF Low Battery Restore Enabled Enabled Enabled Enabled
Options
PBX (L5200 only) Blank Blank Blank Blank
Call Wait Cancel (L5200 only) Blank Blank Blank Blank
Number of Reports 2 Reports 2 Reports 2 Reports 2 Reports
Alarm Report Delay 30 Sec. 30 Sec. 30 Sec. 30 Sec.
First Report Offset 6 Hrs 12 Hrs 12 Hrs 12 Hrs
Report Frequency Never 30 Days Never Never

Honeywell L5200 Series Specifications

General

Brand	Honeywell
Model	L5200 Series
Category	Security System
Language	English