Honeywell L5200 Series User Manual

– 10 –
SYSTEM OVERVIEW
About the Touch Screen Control
General
**IMPORTANT**
If the LYNX Touch is beeping rapidly upon entering the premises, an alarm has occurred during your absence
and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a
nearby safe location.
The touch screen icons and keys allow you to control all system functions. Additionally, the touch screen display
shows the zone and description of all system occurrences. When the speaker phone mode is active, a full-
function telephone keypad is displayed on the touch screen.
The system also features a built-in sounder, which will sound during alarms and troubles and a built-in speaker
announces system status. Additionally, the system "beeps" during certain system functions, such as during
entry/exit delay times, in Chime mode, and when depressing any of the keys (to acknowledge the key press).
The voice announcement volume is adjustable. The “beeps” that sound in response to alarms always sound at
the maximum volume level however, the volume level for all other “beeps” (trouble, chime, exit/entry, etc) can
be adjusted.
5200-100-002-V0
2
7
6
3
1
5
4
Index Item Description
1 Display
Window
Color Liquid Crystal Display (LCD) Touch screen. Displays system status icons, time, system status
information, user menus and the virtual keypad.
2 Ready LED
Indicator
(Green)
ON = System is ready to be armed
OFF = System is armed
Blinking = System is disarmed, and not ready to be armed (a fault exists)
Blinking alternately with Ready LED = Speaker phone mode is active
3 Speaker Source of audible internal warning and confirmation sounds, status announce-ments, as well as alarms
(see "Summary of Audible Notifications").
4 Home key Used to exit from a screen or return to the Home Screen.
5 Panic key When depressed for 4 seconds, the virtual panic icons are displayed on the touch screen.
6 Microphone Used to record personal messages via the Message Center, and for Two-way Voice and Speaker
Phone operation.
7 Armed LED
Indicator
(Red)
ON = System is armed (STAY or AWAY)
OFF = System is disarmed
Blinking = System armed, and an Alarm or Fault has occurred.
Blinking alternately with Ready LED = Speaker phone mode is active

Honeywell L5200 Series Specifications

General

Brand	Honeywell
Model	L5200 Series
Category	Security System
Language	English