– 57 –
USER FUNCTIONS
Video Camera Control Feature
The LYNX Touch L5200 supports up to 20 video cameras and provides the capability to view live video from a
single Camera. The installation of a WiFi Communications module and a WiFi internet connection are required.
Check with your installer to see if this features is available.
Selecting a Camera
5200-100-001-V0
Video
Notices
Traffic
Security
News
5-Day Forecast
2
68
35
1:
F
PM
October 1, 2013
Feels Like 71
Mostly Sunny
F
Automation
Ready To Arm
1. With the system in the disarmed or armed state, select the
Video icon. The system advances to Cameras screen
5200-100-010-V0
IP
Cameras
MACName
Back
Scan
Ready To Arm
2. If no cameras have been discovered or if a list of discovered
cameras is invalid, a Camera scan will start automatically.
Note: The latter can occur if a WiFi connection is lost.
3. A Manual scan can be performed by selecting the “Scan”
button. When the scan is complete the available cameras will
be displayed.
Note: Up to 20 cameras will be viewable during scanning/
enrollment however, only four will appear on each page.
5200-100-007-V1
IP
Cameras
MACName
10.10.150.159 00:C0:02:8F:60:4E
10.10.150.67 00:0E:8F:79:CB:C2Name
10.10.150.158 00:0E:8F:79:C7:EFName
Name
10.10.150.176 00:C0:02:7B:67:E4Name
Back
Scan
Ready To Arm
4. Select the desired camera from the list. If applicable select
the “” button to view additional pages of the list. Select the
“
” button to return to the previous page of the list.
5200-100-093-V1
IP
Cameras
MACName
10.10.150.159 00:C0:02:8F:60:4E
10.10.150.67 00:0E:8F:79:CB:C2Name
10.10.150.158 00:0E:8F:79:C7:EFName
Name
10.10.150.176 00:C0:02:7B:67:E4Pool
Back
Edit
Scan
Ready To Arm
5. The selected camera is highlighted in green. To edit the
camera name go to step 6 OR to save the camera go to step
9.
6. To edit the camera name tap the highlighted camera again.
After the highlight color changes to yellow, select the edit
button.
Note: To de-select a camera “tap” the highlighted camera two times.
7. Select the “Clear” button on displayed keypad, then enter the
deisred text.
8. Select “Done”.
9. Select the “Back” button.
5200-100-008-V0
1 2
3 4
Ready To Arm
POOL
10. The system displays video from the selected camera.
11. To select a different camera, select the camera button then
tap the selected camera two times and repeat steps 4 to 9 as
applicable.
12. Refer to the Video Camera Controls table for information
regarding the Video Function buttons. The available controls
are dependent upon the cameras that have been installed
and selected.
To Next Page
Loading...
Need help?
General
