Honeywell L5200 Series User Manual

– 58 –
USER FUNCTIONS
Video Camera Control Feature
Video Camera Reset
In the event that video streaming is lost, freezes or becomes
pixelated the control can automatically or manually
reset the video depending on the option that is selected. The system is defaulted to automatically recover within
approximately 1 minute after communication has been restored.
Reset Video Cameras
WiFi ConfigDate Time
Ready To Arm
Events
Back
Reminders
KeypadUsers
5200-100-036-V0
Slide Show
Test
1. At the Master User screen select the WiFi Config icon. The
system displays the WiFi options screen. The enabled recover
mode will be displayed.
5200-100-073-V1
Scan Access Points
Manual Configure AP
Manual Video Recovery
WPS
Press the WPS button on the access point, then press this WPS button.
Ready To Arm
2. Selecting Automatic Video Recovery button will enable the
manual feature or selecting the Manual Video Recovery
button will enable the Automatic feature. The display toggles
to display the selected mode and saves the entry.
• If Automatic Video Recovery is enabled with TotalConnect
services, “Wait for Automatic Video Restore” will be displayed in a
blue band. The video recovery will be automatically recovered
within approximately 1 minute after the camera restores
communication.
• If Automatic Video Recovery is enabled without TotalConnect
services, the video recovery will begin automatically after the
camera restores communication.
• If Automatic Video Recovery is enabled the video can be
recovered manually.
• If Manual Video Recovery is enabled, “Double tap to restore
video” will be displayed in a yellow band. The video recovery will
begin automatically after the camera restores communication
• If the control is in the Armed Away state the camera must be
recovered via the manual mode.
5200-100-119-V0
1 2
3 4
Ready To Arm
Double Tap to Restore Video
3. If Automatic Video Recovery is enabled, wait for the camera to
automatically recover. If Manual Video Recovery is enabled,
tap the video dispay two times to restore video.
Note: If the control is in the Armed Away state the camera must
be recovered via the manual mode.
4. Upon recovery the video display will return to normal and the
camera name will be displayed in a green band.

Honeywell L5200 Series Specifications

General

Brand	Honeywell
Model	L5200 Series
Category	Security System
Language	English