Honeywell SC100 User Manual

Honeywell
- 3 -
Sensitivity
Settings
Material
Detection
Radius
Applications Noise Level
G
noisy
Steel 1.5m
Free Standing Safes, Night
Deposit Safes, ATMs and
Chests with excessive noise
(internal or external)
Heavy noise level
Note
 Sensitivity settings (G
high
, G
normal
, G
low
, G
noisy
) are defined in “DIP Switch Settings” on page
18.
 The parameters in the table above are for reference only, and they may vary according to
the quality of the material.
 The detection range will be reduced if cracks and joints exist in the material.
Features
Seismic Vibration Detector SC100 has the following features:
 24-hour detection of all known attack tools on Vault, Doors, Safes, ATMs, and so on.
 Flat frequency non resonant response sensor for genuine frequency analysis.
 Built-in diagnostic tool used to set detector sensitivity in relation to existing noise level.
 DIP switch sensitivity settings adapt to various applications.
 Integrated EOL resistors compatible with various control panels.
 High detection capability due to new sophisticated signal handling and computer algorithms
incorporated.
 Low current consumption.
 Solid state change over alarm relay.
 Multipurpose accessories provided with multiple applications.
 Standard drill sheet protection.
 Rate of Rise and temperature alarm.
 Miniature metal housing – easy to fit in restricted spaces.
 Approved by IMQ type 3 (pending), UL (pending), ULC (pending), CE, and CCC (pending).

Honeywell SC100 Specifications

General

Brand	Honeywell
Model	SC100
Category	Security Sensors
Language	English