Honeywell ScanPal EDA50 User Manual

1. Features of ScanPal EDA50 Enterprise Hybrid Device
10 ScanPal EDA50 Enterprise Hybrid Device User Guide
5. Press down the battery cover safety button to move the battery cover safety
lock to the lock position at left
Battery icon
Battery icon on the status bar shows the power status of the battery. The
following table only contains several of the icons. For detailed information about
battery life and power remained, please go to Settings > Battery.
Battery icon
Icon Status
Battery power is 100% full
Battery power is 50% full
Battery power is too low. Replacing the battery right now.
The terminal has been connected to external power supply for
charging.
Battery failure occurs. Please replace the battery. If the failure still
exists, please contact Honeywell technical support.

Honeywell ScanPal EDA50 Specifications

General

Screen shape	Flat
Second display	No
Display diagonal	5 \
Display resolution	1280 x 720 pixels
Orientation sensor	-
Processor cores	4
Processor model	MSM 8916
Processor family	Qualcomm Snapdragon
Processor frequency	1.2 GHz
RAM capacity	2 GB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Internal storage capacity	8 GB
Rear camera type	Single camera
Rear camera resolution (numeric)	5 MP
2G standards	EDGE, GSM
3G standards	WCDMA
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	4.0
SIM card capability	Single SIM
Mobile network generation	3G
Subscription type	No subscription
USB version	2.0
USB connector type	Micro-USB
HDMI ports quantity	0
Platform	Android
App distribution platform	Google Play
Operating system installed	Android 4.4.4
Form factor	Bar
Product color	Black
Talk time (3G)	- h
Battery capacity	4000 mAh
Battery recharge time	4 h
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	18 mm
Width	153.5 mm
Height	78.9 mm
Weight	270 g