1. Features of ScanPal EDA50 Enterprise Hybrid Device
ScanPal EDA50 Enterprise Hybrid Device User Guide 15
Battery maintenance recommendations and safety
protection measures
• Fully charge the battery before using it. The battery is only partly charged
when get packed.
• Refer to the chapter "charging" to get the right process for battery charging.
Using the battery for other devices may cause damages on the device or
the battery.
• Avoid battery or terminal drops. If you suspect that a battery or terminal
fails, send it to Honeywell service center for verification.
• This battery can only replace another BAT-EDA50 battery. These batteries
have been tested and meet the appropriate safety standards. If you need to
replace the battery, please contact Honeywell service representatives or
the resellers.
• There are security risks in waste batteries. Before cleaning up the battery,
stick the poles with insulation tape.
• Do not modify the battery or attempt to insert foreign objects into the
battery.
• Do not solder directly to the battery poles.
• Do not short connect the battery and put the battery away from metal
objects.
• Do not drop or mechanically shock or extrude the battery.
• Do not disassemble or open the battery. Do not crush, bend or deform the
battery; Do not puncture, shred or burn the battery.
• Do not immerse the battery in water.
Enabling Airplane mode
If you don't need to connect to any wireless network, you can enable the
airplane mode to turn off all wireless receivers to save power.
1. Tap Settings.
2. Tap More under Wireless & Networks.
3. Select Airplane Mode box to enable airplane mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
