6. Terminal configurations
64 ScanPal EDA50 Enterprise Hybrid Device User Guide
Configuring Bluetooth settings
Users can configure for Bluetooth in Application Settings.
1. Enter Application Settings screen, and tap Bluetooth.
2. Tap Menu icon to select one for setting:
• Tap Rename phone to change the name of the terminal. Enter a new name
and then tap Rename.
• Tap Visibility timeout to set the timeout duration for the terminal to be
detectable, which is 2mins by default. Users can set it up as 5mins, 1hour
or Never timeout. The shorter of the duration, the more power it could save.
• Tap Show received files to view data in the received files.
Searching for EDA50
By default, EDA50 is not detectable by other devices, which means it's not
visible for other Bluetooth-enabled devices.
1. Tap All Applications > Settings.
2. Make sure Bluetooth radio has already been enabled.
3. Tap Bluetooth.
4. Tap ScanPal EDA50 (the default terminal name) at the top of the screen to
change it to be detectable. Then the terminal begins 2mins countdown,
during which period other devices can detect EDA50 through Bluetooth
techonology.
Renaming or disconnecting a paired device
Users can rename or disconnect a paired Bluetooth-enabled device in the
Application Settings.
1. Enter Application Settings screen, and tap Bluetooth.
2. Tap Settings icon in the Paired List
.
3. To rename the device, tap Rename, enter a new name and click OK.
To disconnect with this device, tap Cancel Pairing.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
