Honeywell SRX3 User Manual

When using the TouchConnect™ feature to pair the SRX2/SRX3 Hard Hat
Headset with a Talkman A700/A700x Series device, you can obtain the operator
ID by touching the device to the symbol located on the outside of the
headset earcup.
Installing the SRX2/SRX3 Hard-Hat Clip
The SRX2/SRX3 Hard-Hat headset attaches to the side of a hard hat using a clip that
must be mounted on the hard hat. Honeywell offers two clip styles, one designed to
insert in a hard-hat slot and one that mounts over the side brim of a non-slotted hard
hat. Other hard-hat clips may be purchased and used provided that they fit the hard hat
and attach correctly to the SRX2/SRX3 earcup.Vendors such as Howard Leight™ offer
these products.
NOTE
The hard-hat clips are not designed for frequent removal. It may be
necessary to order extra clips if users intend to alternate wearing the
headset earcup on the left and right sides.
l Inserting a slotted-mount clip in a hard hat
l Position the clip with the tab pointing into the slot on
the side of the hard hat.
SRX3 User Guide - Preliminary 28

Honeywell SRX3 Specifications

General

Brand	Honeywell
Model	SRX3
Category	Headsets
Language	English