Honeywell TUXWIFIW Installation And Setup Guide

Security (cont’d)
32
To set the NIGHT function, do the following:
Press the Setup > System setup > Advanced Setup icons. If required, enter your
authorized code.
Select the arming mode to be activated when NIGHT is selected on the "Arming" screen.
Apply accepts the setting. Back cancels your selection.
Output Setup Function
Tuxedo can activate/deactivate up to 18 pre-defined control panel output functions (if programmed in
the control panel). The Output Setup screen displays Output selections. Control these output functions
by enabling/disabling as follows:
Press the Setup , System setup and Advanced Setup icons. If required, enter your
Authorized Code.
Press the Output Setup icon and select the outputs to display or not display on the Output
screen; then press Apply . A confirmation window is displayed stating: “Information Settings saved”
Press OK to save the setting.
If the Back icon is pressed, a confirmation window appears stating: “Output Settings changed. Do
you want to save new settings?” Select Yes or No.
NOTE: This is a local setting for the graphic keypad. If user has the maximum number of keypads on
the system, and wants to disable the same output for all, each Tuxedo needs to be set
individually.

Honeywell TUXWIFIW Specifications

General

Brand	Honeywell
Model	TUXWIFIW
Category	Security System
Language	English