To Next Page

To Previous Page

3． Manually Broadcast

The zones and tasks can be set to be controlled by manually broadcast.

In above two lists, one list shows the zones and groups can be controlled by X-NPMS, another

shows the task list can be used in manually broadcast window. Choose zones in left upper window,

and left click to drag them to left bottom list. Each zone and group is corresponding to the buttons

in manually broadcast. Click or button to adjust their positions. Then choose some or all

tasks in the right upper list, keep left clicking and drag them to Selected Tasks.

4． Speech Synthesis

Broadcast operation of speech synthesis can be conducted by X-NPMS. Relevant settings, such

as task setting and content setting should be configured before operation. Please refer to the

chapter task setting of X-NPMS for setting speech synthesis task. Content settings of speech

synthesis are languages, audio files and synthesis.

 Languages

Use to set broadcast language, which is shown as follows:

Select the check box to enable the language. Click can add new languages and input names.

Choose a language and click can delete it. The order of the language in list is also the

broadcast order in X-NPMS. Click and to adjust the order. In the same system, every X-

NPMS can have different languages, but broadcast order is the same.

 Audio Files

Users can set the basic elements for speech synthesis, which are speech segments. Speech

segments, including description and audio files can be added here.

Honeywell X-DCS3000 User Manual

Other manuals for Honeywell X-DCS3000