Honeywell X-DCS3000 User Manual

49
3． Groups
Zone groups can be set for X-NRI through configuration software. Each group can contain many
zones. The Groups window is displayed as shown below：
 DCS List & Speaker Line List
After finishing the DCS List setting in the step of Devices, all of the selected DCS would be
displayed in the DCS List in this step. Select one DCS, and all zones connected to it would be
displayed in the Speaker Line List.
 Group List
a. User has to create a group in the Group List. Click the icon in the Group List view, the
Add window is displayed as below:
Enter the Group Name, and select the category if it is necessary. The group will be
displayed as the subdirectory under the category. Then click OK.
b. Select one group and click icon or double-click the list, the Edit window for editing the
play list name as needed, is displayed as below:
c. Select one or more groups in the Group List, and then click icon to delete them.
Right click in the list for Add Edit and Delete menu also can do the play list addition, edit
or deletion operation.

Honeywell X-DCS3000 Specifications

General

Brand	Honeywell
Model	X-DCS3000
Category	Amplifier
Language	English