Standard Operation Process
Document No. : Hawking FA disassembly SOP Station:
Process Name : Ver. : Date :
Fixture list(fixture specifications) Qty Fixture list(fixture specifications) Qty
Step：
Department：Tabulator：
Ya Zhu
IE
3(1/1)
Dismantle C top and Base Bottom
1.00
1. Open the machine for about
60degrees and place it on the table
vertically.
2. Dismantle the C top and bottom, use
suction cup to suck at the bottom
right position.
3. Hold top with left hand ,pull suction
cup with right hand, and remove
bottom
4. Lay the notebook flat, and remove
the whole bottom from left fo right
Take care to protect the appearance
when disassembling the machine
2018/03/12
Sucker 1
To Next Page
Loading...
Need help?
General
