3 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Attaching the Monitor Stand
CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can
cause damage.
TIP: Consider the placement of the display, because the bezel might cause interfering reflections
from surrounding light and bright surfaces.
1. Remove the stand/base assembly, and then lift the monitor from the box and place it face down
on a flat surface.
2. Slide the stand into the base until the stand is locked in place.
Attaching the Monitor Stand 5
To Next Page
Loading...
Need help?
General
