HP 245 G8 User Manual

Table 5-7 Memory module descriptions and part numbers
Description Spare part number
4 GB (2666 MHz) L10598-855
8 GB (2666 MHz) 937236-855
8 GB (3200 MHz) L46598-005
Before removing a memory module, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 26).
2. Remove the rubber feet (see Computer feet on page 26).
3. Remove the bottom cover (see Bottom cover on page 27).
4. Remove the battery (see Battery on page 28).
To remove a memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
2. Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
Solid-state drive
To remove the solid-state drive, use this procedure and illustration.
Table
5-8 Solid-state drive descriptions and part numbers
Description Spare part number
Solid-state drive, PCIe:
Component replacement procedures 35

HP 245 G8 Specifications

General

Brand	HP
Model	245 G8
Category	Laptop
Language	English