HP 25x User Manual

A Technical specications
NOTE: All specications represent the typical specications provided by HP's component manufacturers;
actual performance may vary either higher or lower.
For the latest specications or additional specications on this product, go to http://www.hp.com/go/
quickspecs/ and search for your specic model to nd the model-specic QuickSpecs.
Table A-1 Technical specications
Specication Measurement
Display, wide-screen
Panel type
62.23 cm
TN LCD
24.5 in
Viewable image size 62.23 cm, diagonal 24.5 in, diagonal
Tilt -5° to 23°
Height adjustment 0 mm to 130 mm 0 in to 5.12 in
Weight (with stand) 5.51 kg 12.15 lb
Dimensions (including stand)
Height
Depth
Width
48.96 cm
27.25 cm
55.75 cm
19.28 in
10.73 in
21.95 in
Maximum graphic resolution 1920 × 1080 @ 240 Hz
Optimum graphic resolution 1920 × 1080 @ 60 Hz
Static contrast ratio 1000:1 typical
Dynamic contrast ratio 12,000,000:1
Dot pitch 0.283 (H) mm × 0.280 (V) mm
Pixels per inch 89.7 PPI
Horizontal scan rate 30–255 kHz
Vertical scan rate 48–240 Hz
Response time The default response time for the monitor is 3 ms. The response
time can be adjusted to as fast as 1 ms in the display menu. All
performance specications represent the typical specications
provided by HP’s component manufacturers; actual performance
may vary either higher or lower.
Environmental requirements
Temperature
Operating temperature
Non–operating temperature
Relative humidity
5°C to 35°C
-34°C to 60°C
20% to 80%
41°F to 95°F
-29°F to 140°F
24 Appendix A Technical specications

HP 25x Specifications

General

Brand	HP
Model	25x
Category	Monitor
Language	English