HP A5500 HI Series User Manual

44
Product
code
Power supply Specifications Reference
JD366A PSR150-D
• Rated input voltage range:
–48 VDC to –60 VDC
• Max input voltage range:
–36 VDC to –72 VDC
• Max output power:
150 W
HP PSR150-A & PSR150-D
Power Supplies User
Guide
Interface cards
Product
code
Card model Port type and quantity Transceiver module options
JD367A LSPM2GP2P 2 × 1 Gbps SFP fiber ports
1000 Mbps SFP transceiver modules
(except for SFP-GE-T)
JD368B LSPM2SP2P 2 × 1/10 Gbps SFP+ fiber ports
• 1000 Mbps SFP transceiver modules
• 10 Gbps SFP+ transceiver
modules/SFP+ cables
JD360B LSPM1CX2P 2 × 10 Gbps CX4 copper ports CX4 cables
JD359B LSPM1XP2P 2 × 10 Gbps XFP fiber ports
10 Gbps XFP transceiver modules
JD361B LSPM1XP1P 1 × 10 Gbps XFP fiber port
JG314A LSP5GP8P0
8 × 100/1000Base-X SFP fiber
ports
• 1000 Mbps SFP transceiver modules
• 100 Mbps SFP transceiver modules
JG313A LSP5GT8P
8 × 10/100/1000Base-T
Ethernet ports
N/A
NOTE:
• The LSP5GT8P interface card adds 34.75 mm (1.37 in) to the depth of the A5500 HI switch (see Fi
g
ure
23).
• The depth of the rack for the A5500 HI switch installed with an LSP5GP8P0 interface card must be 800
mm (31.50 in) or 1000 mm (39.37 in), because the card adds 69.75 mm (2.75 in) to the chassis depth
(see Figure 24) in addition to the clearance required for installing transceiver module
s and fibers.
• For more information about the interface cards, see their user guides.
SFP/SFP+/XFP transceiver modules and SFP+/CX4
cables
This section describes the transceiver modules and transceiver module cables available for the HP
A5500 HI Switch Series.

HP A5500 HI Series Specifications

General

Brand	HP
Model	A5500 HI Series
Category	Switch
Language	English