EasyManuals Logo
Home>HP>Switch>A5830 Series

HP A5830 Series User Manual

HP A5830 Series
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
44
ACL does not exist on the NAS, ACL assignment fails, and the NAS forcibly logs the RADIUS user out. If
the assigned VLAN does not exist on the NAS, the NAS creates the VLAN and adds the RADIUS user or
the access port to the VLAN.
Specifying a RADIUS client
Specify the IP address of a client to be managed by the RADIUS server and configure the shared key.
The RADIUS server processes only the RADIUS packets sent from the specified clients.
To specify a RADIUS client:
To do… Use the command… Remarks
1. Enter system view.
system-view
2. Specify a RADIUS client.
radius-server client-ip ip-address [ key
string ]
Required.
No RADIUS client is
specified by default.
The IP address of a RADIUS client specified on the RADIUS server must be consistent with the source IP
address of outgoing RADIUS packets configured on the RADIUS client.
The shared key configured on the RADIUS server must be consistent with that configured on the RADIUS
client.
Displaying and maintaining AAA
To do… Use the command… Remarks
Display the configuration
information of ISP domains
display domain [ isp-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display information about user
connections
display connection [ access-type { dot1x |
mac-authentication } | domain isp-name |
interface interface-type interface-number | ip
ip-address | mac mac-address | ucibindex
ucib-index | user-name user-name | vlan vlan-
id ] [ slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
AAA configuration examples
AAA for Telnet users by an HWTACACS server
Network requirements
As shown in Figure 10, configure the switch to use the HWTACACS server to provide authentication,
authorization, and accounting services for Telnet users.
Set the shared keys for authenticating authentication, authorization, and accounting exchanges with the
HWTACACS server to expert. Configure the switch to remove the domain name from a username before
sending the username to the HWTACACS server.

Table of Contents

Other manuals for HP A5830 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A5830 Series and is the answer not in the manual?

HP A5830 Series Specifications

General IconGeneral
BrandHP
ModelA5830 Series
CategorySwitch
LanguageEnglish

Related product manuals