HP AE370A - Brocade 4Gb SAN Switch 4/12 User Manual

184 Managing virtual fabrics
Enabling Virtual Fabrics
Virtual Fabrics is disabled by default on switches that you upgrade to Fabric OS 6.2.0 or later. Virtual
Fabrics is enabled by default on a new chassis. Before you can use the Virtual Fabrics features, such as
Logical Switch and Logical Fabric, you must enable Virtual Fabrics.
NOTE: When you enable Virtual Fabrics, the CPs are rebooted and all EX_Ports are disabled after the
reboot.
1. Connect to the physical chassis and log in using an account assigned to the admin role with the
chassis-role permission.
2. Enter the following command to check whether Virtual Fabrics is enabled:
fosconfig --show
3. Delete all Admin Domains, as described in ”Deleting all user-defined Admin Domains” on page 206.
4. Enter the following command to enable Virtual Fabrics:
fosconfig --enable vf
5. Enter y at the prompt.
The following example checks whether Virtual Fabrics is enabled or disabled and then enables it.
switch:admin>
fosconfig --show
FC Routing service: disabled
iSCSI service: Service not supported on this Platform
iSNS client service: Service not supported on this Platform
Virtual Fabric: disabled
switch:admin>
fosconfig --enable vf
WARNING: This is a disruptive operation that requires a reboot to take
effect.
All EX ports will be disabled upon reboot.
Would you like to continue [Y/N]
y
For more information on the fosconfig command, see the Fabric OS Command Reference.
Disabling Virtual Fabrics
When you disable Virtual Fabrics, the following occurs:
• The CPs are rebooted.
• If F_Port trunking is enabled on ports in the default switch, the F_Port trunking information is deleted.
If you want to use Admin Domains in a fabric, you must first disable Virtual Fabrics.
1. Connect to the physical chassis and log in using an account assigned to the admin role with the
chassis-role permission.
2. Enter the following command to check whether Virtual Fabrics is disabled:
fosconfig --show
3. Delete all of the non-default Logical Switches, as described in ”Deleting a Logical Switch” on page 186.
4. Enter the following command to disable Virtual Fabrics:
fosconfig --disable vf
5. Enter y at the prompt.

HP AE370A - Brocade 4Gb SAN Switch 4/12 Specifications

General

Brand	HP
Model	AE370A - Brocade 4Gb SAN Switch 4/12
Category	Switch
Language	English