5. When you use the remote control, point it at the front of the computer, not at the set-top box.
Figure 2-36 Using the Remote Control
Connecting an Optional DisplayPort Video Adapter
If you are adding a second display that has a DisplayPort, then no DisplayPort video adapter is
required. If you are adding a second display that does not have a DisplayPort, you can purchase a
DisplayPort video adaptor from HP for your configuration.
DisplayPort video adapters allow you to connect a second display, such as a monitor or TV, to the
computer.
NOTE: DisplayPort adapters and cables are purchased separately. HP offers a DisplayPort to VGA
adapter, a DisplayPort to DVI adapter, and a DisplayPort to HDMI adapter.
1. Turn off power to the computer and the second display that you are connecting to the computer.
2. Connect the adapter to the DisplayPort connector on the rear I/O panel (1).
40 Chapter 2 Hardware Upgrades ENWW