HP Compaq d220 MT User Manual

2–4 336493-004 Service Reference Guide, d200
Setup Utilities and Diagnostics Features
2.2.2 Computer Setup Menu
.
Heading Option Description
System
Information
None Lists product name, chassis serial number (d220, d228, and
d230 only), Chipset type, BIOS version, BIOS release date,
and MAC Address (d240 and d248 only).
CPU/Memory
information (d220
d228, and d230
models only)
CPU speed, CPU ID, L1 and L2 cache size, and memory
information.
CPU/Memory
information (d240
and d248 models
only)
CPU type and speed, FSB speed, L1 and L2 cache size, Ratio
status, DDR frequency, memory DIMM1, memory DIMM2,
memory DIMM 3, memory DIMM 4, available system memory,
legacy VGA memory
DMI information
(d240 and d248
models only)
Chassis serial number, asset tag number, UUID.
Standard
CMOS Setup
System time
(hh/mm/ss)
Sets the system time (24 hour format).
System date
(mm/dd/yyyy)
Sets the system date.
Floppy drive A Calculates the size and capacity of the floppy drive.
Primary IDE
Master
Auto detects which hard drive is the primary master drive.
Primary IDE Slave Auto detects which hard drive is the primary slave drive
Secondary IDE
Master
Auto detects which hard drive is the secondary master drive.
Secondary IDE
Slave
Auto detects which hard drive is the secondary slave drive.
Advanced
CMOS Setup
Boot Device
Priority
Specifies the boot order for all devices.
Try Other Boot
Devices
Set this option to YES to instruct the BIOS to boot from other
bootable devices not specified under “Boot Device Priority.”
POST Delay Time
(seconds)
Sets the amount of time before the Setup Utility prompt
(F10=Setup) appears when the computer boots.
• None: POST delay time disable (default)
• 5: POST delay of 5 seconds
• 15: POST delay of 15 seconds
• 25: POST delay of 25 seconds
• 35: POST delay of 35 seconds
✎
Support for Computer Setup options may vary depending on your specific hardware configuration.

HP Compaq d220 MT Specifications

General

Brand	HP
Model	Compaq d220 MT
Category	Desktop
Language	English