Service Reference Guide, d200 336493-004 2–7
Setup Utilities and Diagnostics Features
Peripheral
Setup
(Continued)
OnBoard Parallel
Port
Sets the OnBoard Parallel Port settings.
•Auto (default)
•Disable
•378
•278
Parallel Port Mode
(d240 and d248
models only)
Allows you to set the Parallel Port mode.
•SPP (Bi-Dir)
• SPP and EPP-1.9
•ECP
• ECP and EPP-1.9 (default)
Hardware
Monitor
CPU Ratio
Selection
Allows you to setup the CPU Multiplier Ratio for unlocked Intel
P4 & Celeron processors.
CPU Warning
Temperature
Warns when CPU temperature is greater than 85°C/185°F.
CPU Shutdown
Temperature
System will shutdown when CPU temperature is greater than
90°C/194°F.
System Warning
Temperature
Warns when system temperature is greater than 60°C/140°F.
System Shutdown
Temperature
System will shutdown when system temperature is greater than
65°C/149°F.
CPU Temperature Detects current CPU temperature.
System
Temperature
Detects current system temperature.
CPU FAN Speed Detects CPU fan speed.
Chassis FAN
Speed
Detects current chassis fan speed.
CPU VID Detects current CPU voltage.
Vccp Detects current Vccp voltage.
+1.5V Detects current ATX power +1.5V.
+2.5V Detects current ATX power +2.5V.
+3.3V Detects current ATX power +3.3V.
+5.0V Detects current ATX power +5.0V.
+12.0V Detects current ATX power +12.0V.
HVcc (+3.3VSB) Detects current HVcc voltage (d240, d248 only).
Password
Option
Change
Supervisor
Password
Allows you to set and change the supervisor password.
✎
Support for Computer Setup options may vary depending on your specific hardware configuration.
Heading Option Description
To Next Page
Loading...
Need help?
General