EasyManuals Logo
Home>HP>Desktop>Compaq dc7800

HP Compaq dc7800 User Manual

HP Compaq dc7800
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
After the system files have been transferred, SYS will return to the A:\ prompt. Go to step 13.
9. Copy any files you want to keep from your USB flash media device to a temporary directory on
another drive (for example, the system's internal hard drive).
10. At the A:\ prompt, enter FORMAT /S X: where X represents the drive letter noted before.
CAUTION: Be sure that you have entered the correct drive letter for the USB flash media device.
FORMAT will display one or more warnings and ask you each time whether you want to proceed.
Enter Y each time. FORMAT will format the USB flash media device, add the system files, and ask
for a Volume Label.
11. Press Enter for no label or enter one if desired.
12. Copy any files you saved in step 9 back to your USB flash media device.
13. Remove the diskette and reboot the computer. The computer will boot to the USB flash media
device as drive C.
NOTE: The default boot order varies from computer to computer, and it can be changed in the
Computer Setup (F10) Utility.
If you have used a DOS version from Windows 9x, you may see a brief Windows logo screen. If
you do not want this screen, add a zero-length file named LOGO.SYS to the root directory of the
USB flash media device.
Return to Copying to Multiple Computers on page 34.
Unsupported USB Flash Media Device
To create a bootable USB flash media device, you must have:
a USB flash media device
a bootable DOS diskette with the FDISK and SYS programs (If SYS is not available, FORMAT may
be used, but all existing files on the USB flash media device will be lost.)
a PC that is bootable from a USB flash media device
CAUTION: Some older PCs may not be bootable from a USB flash media device. If the default boot
order in the Computer Setup (F10) Utility lists the USB device before the hard drive, the computer can
be booted from a USB flash media device. Otherwise, a bootable diskette must be used.
1. If there are any PCI cards in the system that have SCSI, ATA RAID or SATA drives attached, turn
off the computer and unplug the power cord.
CAUTION: The power cord MUST be unplugged.
2. Open the computer and remove the PCI cards.
3. Insert the USB flash media device into one of the computer's USB ports and remove all other USB
storage devices except USB diskette drives. Close the computer cover.
4. Plug in the power cord and turn on the computer.
5. As soon as the computer is turned on, press F10 when the monitor light turns green to enter
Computer Setup. Press Enter to bypass the title screen, if necessary.
36 Chapter 4 Desktop Management

Table of Contents

Other manuals for HP Compaq dc7800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq dc7800 and is the answer not in the manual?

HP Compaq dc7800 Specifications

General IconGeneral
Tcase73.3 °C
Bus typeFSB
SteppingM0
Processor cache2 MB
Processor cores2
Processor modelE4600
System bus rate- GT/s
Processor familyIntel® Core™2 Duo
Processor seriesIntel Core 2 Duo E4000 Series
Processor socketLGA 775 (Socket T)
Processor codenameConroe
Processing Die size111 mm²
Processor frequency2.4 GHz
Processor cache typeL2
Processor lithography65 nm
Processor manufacturerIntel
Processor front side bus800 MHz
Processor operating modes64-bit
ECC supported by processorNo
Thermal Design Power (TDP)65 W
CPU multiplier (bus/core ratio)12
Number of Processing Die Transistors167 M
Internal memory1 GB
Internal memory typeDDR2-SDRAM
Maximum internal memory8 GB
Memory layout (slots x size)2 x 0.5 GB
HDD speed7200 RPM
HDD interfaceSATA
Optical drive typeDVD Super Multi
Total storage capacity160 GB
Audio input1
LightScribeYes
Networking featuresIntel 82566DM Gigabit Network Connection
Graphics card RAMDAC400 MHz
Storage drive controllerSATA 3, 0 Gb/s NCQ SMART VI
Discrete graphics card modelIntel® GMA 3100
Maximum graphics card memory0.256 GB
Operating system installedWindows Vista Business
USB 2.0 ports quantity8
Chassis typeMini Tower
Country of originChina
Cable lock slot typeKensington
Operating altitude0 - 3048 m
Non-operating altitude0 - 9144 m
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)10 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Power supply365 W
Product typePC
Processor codeSLA94
Processor ARK ID32242
Processor package size37.5 x 37.5 mm
Weight and Dimensions IconWeight and Dimensions
Depth452 mm
Width177 mm
Height447 mm
Weight11800 g

Related product manuals