Onboard LAN Boot
ROM
Allows you to disable/enable the boot ROM of the onboard LAN chip.
SATA Controller Allows you to set:
●
Disabled
●
SATA1
●
SATA1+2
Onboard Audio Allows you to set the onboard audio to:
●
Auto
●
Disabled
●
Enabled
Internal Speaker Allows you to set the internal speaker to:
●
Disabled
●
Enabled
Supervisor Password Allows you to change supervisor password.
User Password Allows you to change the user password.
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-3 Computer Setup—Power
Option Description
After AC Power Failure Allows you to select system restart behavior after power loss:
●
Auto
●
Power On
●
Stay Off
NX Disables/enables NX bit.
Table 2-2 Computer Setup—Advanced (continued)
6 Chapter 2 Computer Setup (F10) Utility
To Next Page
Loading...
Need help?
General