HP Compaq dx7300 MT User Manual

Service Reference Guide, dx7300 433611-001 6–37
Removal and Replacement Procedures— Microtower (MT) Chassis
6.19.2 Type 2 Battery Holder
1. To release the battery from its holder, squeeze the metal clamp that extends above one edge
of the battery. When the battery pops up, lift it out 1.
2. To insert the new battery, slide one edge of the replacement battery under the holder’s lip
with the positive side up 2. Push the other edge down until the clamp snaps over the other
edge of the battery.
3. Replace the computer cover or access panel (Section 6.3).
4. Plug in the computer and turn on power to the computer.
5. Reset the date and time, your passwords, and any special system setups, using Computer
Setup. Refer to the Computer Setup (F10) Utility Guide.

HP Compaq dx7300 MT Specifications

General

Brand	HP
Model	Compaq dx7300 MT
Category	Desktop
Language	English