HP Compaq Elite 8300 Series User Manual

7. Remove the black screw on the front of the chassis behind the bezel. The screw is located next
to the optical drive and is labeled "BEZEL."
Figure 5-35 Retrieving the Front Bezel Security Screw
8. Replace the front bezel.
9. Install the security screw through the middle front bezel release tab and into the chassis to
secure the front bezel in place.
Figure 5-36 Installing the Front Bezel Security Screw
10. Replace the access panel.
11. If the computer was on a stand, replace the stand.
12. Reconnect the power cord and turn on the computer.
13. Lock any security devices that were disengaged when the access panel was removed.
154 Chapter 5 Ultra-Slim Desktop (USDT) Hardware Upgrades

HP Compaq Elite 8300 Series Specifications

General

Brand	HP
Model	Compaq Elite 8300 Series
Category	Desktop
Language	English