HP D2D Service And Maintenance Guide

NOTE: The memory module for the HP D2D4324/4312 model does not have a cable.
4. Be sure to update the HP D2D software to the latest version. This is done from the Web
Management Interface (Settings/Software page), as described in the HP StorageWorks D2D
Backup System User Guide.
IMPORTANT: If your replacement flash stick is at a lower revision than the one it replaces,
you may experience a message of “Devices Starting” or “Initialising". This message will also
occur, if the D2D Backup System did not shutdown correctly. In this case, please wait a
minimum of 12 hours before updating software.
Figure 8 HP D2D4324 and D2D4312 G2 Series flash memory module
Figure 9 HP D2D4106 or HP D2D4112 G2 flash memory module
16 The flash memory module

HP D2D Specifications

General

Brand	HP
Model	D2D
Category	Storage
Language	English