To Next Page

To Previous Page

Table 12-1 Power cord requirements for specic countries and regions (continued)

Country/region Accredited agency Applicable note number

India BIS 1

Israel SII 1

Italy IMQ 1

Japan JIS 3

Netherlands KEMA 1

New Zealand SANZ 1

Norway NEMKO 1

People's Republic of China CCC 4

Saudi Arabia SASO 7

Singapore PSB 1

South Africa SABS 1

South Korea KTL 5

Sweden SEMKO 1

Switzerland SEV 1

Taiwan BSMI 6

Thailand TISI 1

United Kingdom ASTA 1

United States UL 2

1. The exible cord must be Type HO5VV-F, three-conductor, 0.75 mm² conductor size. Power cord set ttings (appliance coupler and

wall plug) must bear the certication mark of the agency responsible for evaluation in the country or region where it will be used.

2. The exible cord must be Type SVT/SJT or equivalent, No. 18 AWG, three-conductor. The wall plug must be a two-pole grounding

type with a NEMA 5-15P (15 A, 125 V ac) or NEMA 6-15P (15 A, 250 V ac)

conguration. CSA or C-UL mark. UL le number must be

on each element.

3. The appliance coupler, exible cord, and wall plug must bear a T mark and registration number in accordance with the Japanese

Dentori Law. The exible cord must be Type VCTF, three-conductor, 0.75 mm² or 1.25 mm² conductor size. The wall plug must be

a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) conguration.

4. The exible cord must be Type RVV, three-conductor, 0.75 mm² conductor size. Power cord set ttings (appliance coupler and wall

plug) must bear the CCC

certication mark.

5. The exible cord must be Type H05VV-F three-conductor, 0.75 mm² conductor size. KTL logo and individual approval number

must be on each element. Approval number and logo must be printed on a ag label.

6. The exible cord must be Type HVCTF three-conductor, 1.25 mm² conductor size. Power cord set ttings (appliance coupler, cable,

and wall plug) must bear the BSMI certication mark.

7. For 127 V ac, the exible cord must be Type SVT or SJT 3-conductor, 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL and

CSA or C-UL marks. For 240 V ac, the

exible cord must be Type H05VV-F three-conductor, 0.75 mm² or 1.00 mm² conductor size,

with plug BS 1363/A with BSI or ASTA marks.

100 Chapter 12Power cord set requirements

HP Dragonfly Folio User Manual

Questions and Answers: