Table 5-2 Solid-state drive descriptions and part numbers (continued)
Description Spare part number
512 GB, PCIe-4 × 4, TLC M17436-005
512 GB, PCIe-3 × 4, TLC L85360-001
512 GB, PCIe-4 × 4, TLC, self-encrypting drive (SED) M52031-005
256 GB, PCIe-4 × 4, TLC M52025-005
256 GB, PCIe-4 × 4, TLC, self-encrypting drive (SED) M52029-005
Solid-state drive bracket (available in the Bracket Kit) N22931-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 33).
2. Remove the bottom cover (see Bottom cover on page 33).
3. Disconnect the battery cable from the system board (see Battery on page 42).
Remove the solid-state drive:
1. Remove the Phillips M1.4 × 1.2 screw (1) that secures the drive to the computer.
2. Pull the drive away from the socket to remove it (2).
36 Chapter 5Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
Need help?
General