HP EliteDisplay E243d 23.8 User Manual

Energy saver feature
This monitor supports a reduced power state.
The reduced power state is initiated if the monitor detects the absence of either the horizontal sync signal or
the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blank, the
backlight is turned o, and the power light turns amber. In the reduced power state, the monitor uses < 0.5 W
of power. There is a brief warm-up period before the monitor returns to its normal operating state.
See the computer manual for instructions on setting the energy saver mode (sometimes called “power
management feature”).
NOTE: This power saver feature works only when the monitor is connected to a computer that has energy-
saver features.
By selecting the settings in the monitor Sleep Timer utility, you can also program the monitor to initiate the
reduced power state at a predetermined time. When the monitor Sleep Timer utility initiates the reduced
power state, the power light blinks amber.
38 Appendix A Technical specications

HP EliteDisplay E243d 23.8 Specifications

General

Display Size	23.8 inches
Resolution	1920 x 1080
Panel Type	IPS
Aspect Ratio	16:9
Brightness	250 cd/m²
Contrast Ratio	1000:1
Color Support	16.7 million colors
VESA Mount	100 x 100 mm
Refresh Rate	60 Hz
Response Time	5ms (gray to gray)
Ports	1 x DisplayPort, 1 x HDMI, 1 x USB-C, 4 x USB 3.0
Viewing Angle	178° horizontal, 178° vertical
Built-in Devices	USB hub
Power Consumption	65 W (maximum)
Integrated Speakers	Yes
Height adjustment	Yes