Setting up the docking station
Step 1: Connecting to AC power
WARNING! To reduce the risk of electric shock or damage to your equipment:
Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
To ensure the correct performance of all docking station features, connect the docking station to an AC power
source using the docking station power cord.
1. Connect one end of the power cord to the AC adapter (1), and connect the other end of the power cord to
an AC outlet (2).
2. Lower the AC adapter connector into the power-in connector slot on the docking station (3), press the
connector to the side until it is rmly seated (4), and then rotate the connector so that the cable is
routed through the channel on the side of the docking station chassis (5).
6 Chapter 1 Getting started
To Next Page
Loading...
Need help?
General
