HP Notebook Series User Manual

Power
Hardware and Software Guide 3–23
If you use the notebook occasionally during the discharge
procedure and have set energy-saving timeouts, expect the
following performance from your system during the
discharge
process:
■ The monitor will not turn off automatically.
■ Hard drive speed will not decrease automatically while the
notebook is idle.
■ System-initiated Standby will not occur.
Recharging the Battery Pack
1. Connect the notebook to external power and keep the
notebook connected until the battery pack is fully recharged
and the battery light turns off.
You can use the notebook while the battery pack is
recharging, but the battery pack will charge faster if the
notebook is turned off.
2. Select the Power icon on the taskbar or select Start >
Control Panel > Performance and Maintenance > Power
Options > Power Schemes tab.
3. Reenter the settings you recorded for the items in the
Plugged In column and the Running on Batteries column.
4. Select OK.
Ä
CAUTION: After calibrating the battery pack, reenable Hibernation. To
reenable Hibernation, select Start > Control Panel >
Performance and Maintenance > Power Options >
Hibernate tab, and then select the Enable Hibernation check box.

HP Notebook Series Specifications

General

Category	Laptop
Series	Notebook Series
Processor	Varies by model (e.g., Intel Core i3/i5/i7, AMD Ryzen)
RAM	Varies by model (e.g., 4GB, 8GB, 16GB)
Storage	Varies by model (e.g., 256GB SSD, 1TB HDD)
Display	14-inch to 17.3-inch HD or FHD (varies by model)
Operating System	Windows 10 or Windows 11 (varies by model)
Graphics	Integrated Intel or AMD Graphics or Discrete NVIDIA or AMD Graphics (varies by model)
Battery	Varies by model
Weight	Varies by model