To Next Page

To Previous Page

Connecting the Television Signal and Video Cables 39

Connecting the Television Signal and

Video Cables

This section describes how to connect your computer to the

television and which cables to use.

Using TV Cables

Your computer includes video and audio cables to connect the television signals.

Use the video and audio cables to connect:

 Video out from the computer to the TV.

 TV signal source video in to the computer.

 Audio out from the computer to the TV.

 TV signal source audio in to the computer.

Audio and Video Cables

The following table shows the cable types that may be required to connect your computer

to your television system.

NOTE: Some graphic cards have a DVI connector and a DVI-to-

VGA converter included in the box (select models only). If your

monitor has a VGA connector but no DVI connector, use the DVI-to-

VGA converter to connect to the computer: Connect the DVI-to-VGA

converter to the DVI connector on the computer graphic card, and

then connect the VGA cable to the converter and to the monitor.

NOTE: The location and number of connectors may vary by model.

NOTE: The number and type of cables required to connect your computer may vary by

model. Some cables are included for select models only.

HP Pavilion a6330 Start Here

Other manuals for HP Pavilion a6330