Upgrading and Servicing Guide 17
Removing a Memory Module
1 Remove the optical disc drive. See “Removing an Optical Disc Drive” on page 9.
2 Locate the memory socket on the motherboard.
3 Move any cabling out of the way, if necessary.
4 Push down the two retaining clips on the ends of the socket until the memory module
pops out of the socket. Hold the memory module by its edges only, as you lift it away
from the socket.
5 Store the memory module in antistatic packaging.
WARNING: Do not pull the memory module out of the socket. Use the retaining
clips to eject the module.