6-43
Configuring the Switch
IP Multicast (IGMP) Service Features—Multimedia Traffic Control
Configuring the Switch
1. From the console Main Menu, select:
3. Switch Configuration
5. Advanced Features
1. IP Multicast (IGMP) Service
IGMP Service configuration screen similar to figure 6-18 on page 6-37 is
displayed.
2. In the IGMP Service screen, press [E] (for E
dit)
3. Use the arrow keys to highlight the IP Mcast parameter setting for the port
to which the server is connected.
4. Press [F] or press the Space bar until Forward appears for the parameter
value.
5. Press [Enter] and [S] (for S
ave) to activate the changes you’ve made to the
IGMP configuration and return to the Advanced Features menu.
The multicast communication between the server and the clients will now
operate correctly.
Note
If the server is not directly connected to the switch, and the server’s multicast
traffic is arriving at the switch through the querier port, the above procedure
is not necessary. The querier device will automatically be a member of the
multicast group and the multicast application traffic will be distributed prop-
erly.
If your switch, and not some other device, is acting as the querier, the above
procedure will have to be completed.
Sraswb.book : SIER_SW6.FM Page 43 Tuesday, June 30, 1998 12:20 PM
To Next Page
Loading...
Need help?
General