HP ProCurve Switch 212M User Manual

6-27
Configuring the Switch
Port Settings
Configuring the Switch
Configuring Port Parameters from the Switch Console
To Access Port Configuration:
1. From the Main Menu, select:
3. Switch Configuration...
2. Port Settings
Figure 6-11. Example of the Port Settings Screen
2. Press [E] (for E
dit). The cursor moves to the Enabled field for the first port.
3. See table 6-2 on page 6-24 for the available values for each parameter and
definitions of each value. Or, refer to the online help provided with this
screen.
4. When you have finished making changes to the above parameters, press
[Enter], then press [S] (for S
ave) and return to the Switch Configuration
menu.
Read-Only Fields
Sraswb.book : SIER_SW6.FM Page 27 Tuesday, June 30, 1998 12:20 PM

HP ProCurve Switch 212M Specifications

General

Brand	HP
Model	ProCurve Switch 212M
Category	Switch
Language	English