HP ProCurve Installation Guide

16
Troubleshooting
Troubleshooting
The primary tools for troubleshooting the switch modules are the LEDs on the
front of the switch and on the modules. Refer to “LED Behavior” on page 8.
Also, refer to the Installation and Getting Started Guide for more detailed
troubleshooting information.
The following tables describe switch and module LED displays that indicate
that the module or connections to the ports on the module are not operating
correctly.
Switch and Module LED Error Indicators:
Diagnostic Tips:
See the tables on the next two pages to diagnose the LED error indicators in
the previous table.
Fault Self Test Module Status Port Link Diagnostic Tips
Flashing
†
Flashing
†
Flashing
†
Never On

Flashing
†
Flashing
†
Flashing
†
On briefly, then
Off

Off Off Flashing
†
Off

Flashing
†
Flashing
†
Flashing
†
Flashing
†

Off Off Off Fast Flashing
††

Off Off On Off with cable
connected

†
The flashing behavior is an on/off cycle once every 1.6 seconds, approximately.
††
The fast flashing behavior is an on/off cycle once every 0.8 seconds, approximately.
3013_ed2.book Page 16 Friday, August 9, 2002 2:02 PM

HP ProCurve Specifications

General

Brand	HP
Model	ProCurve
Category	Switch
Language	English