HP ProDesk 400 G3 Small Form Factor User Manual

Expansion card
Description
Printer port, PCI card
GeForce GT 730 graphics card, 2 GB, DDR3, PCIe x8
Nvidia NVS 310 graphics card, 512 MB, DDR3, PCIe x16
Intel 802.11 a/b/g/n (2x2) + Bluetooth 4.0 Wireless NIC
Intel Dual Band Wireless 7265NV 802.11 a/b/g/n (2x2) Wireless NIC
Intel Dual Band Wireless 7265AN 802.11 a/b/g/n (2x2) Wireless NIC
Intel Dual Band Wireless-AC 3165
WLAN module adapter, PCIe card
Intel PRO/1000 single port GbE NIC, includes bracket
The computer has one PCI Express x1 expansion socket and one PCI Express x16 expansion socket.
NOTE: The PCI Express sockets support only low prole cards.
You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 socket.
For dual graphics card congurations, the rst (primary) card must be installed in the PCI Express x16 socket.
To remove, replace, or add an expansion card:
1. Prepare the computer for disassembly (Preparation for disassembly on page 17).
2. Remove the access panel (Access panel on page 18).
3. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot
on the back of the computer chassis.
4. Rotate the slot cover release latch to the open position.
20 Chapter 4 Removal and replacement procedures: Small Form Factor

HP ProDesk 400 G3 Small Form Factor Specifications

General

Brand	HP
Model	ProDesk 400 G3 Small Form Factor
Category	Desktop
Language	English