HP ProDesk 600 G2 Series User Manual

Slim optical drive bezel blank
On some models, there is a bezel blank covering the slim optical drive bay. Remove the bezel blank before
installing an optical drive. To remove the bezel blank:
1. Remove the access panel (Access panel on page 20)
2. Remove the front bezel (Front bezel on page 21)
3. To remove the bezel blank, press upward on the bottom tab and press downward on the top tab on the
side of the blank (1), and then rotate the blank o the front of the bezel (2).
Slim optical drive bezel blank 23

HP ProDesk 600 G2 Series Specifications

General

Brand	HP
Model	ProDesk 600 G2 Series
Category	Desktop
Language	English