HP ProDesk 600 G2 Series User Manual

Speaker
1. Prepare the computer for disassembly (Preparation for disassembly on page 19).
2. Remove the access panel (Access panel on page 20).
3. Disconnect the speaker wire from the system board connector labeled SPKR (1).
4. From the inside of the chassis, remove the silver Torx T15 screw (2) that secures the speaker to the
chassis.
5. Remove the speaker from the chassis (3).
To replace the speaker, reverse the removal procedures.
Speaker 47

HP ProDesk 600 G2 Series Specifications

General

Brand	HP
Model	ProDesk 600 G2 Series
Category	Desktop
Language	English