3 Setting up the monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached
devices, then follow the instructions below.
Use caution when setting up the monitor
To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the panel may cause
non-uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its
normal condition.
If installing a stand, lay the monitor face down on a flat surface covered with a protective sheet foam or
nonabrasive cloth. This prevents the screen from getting scratched, defaced or broken as well as damage to the
front panel buttons.
NOTE: Your monitor may look different from the monitor in this illustration.
4 Chapter 3 Setting up the monitor