HP ProDisplay P222c User Manual

34 pages

To Next Page

To Previous Page

Mounting the Monitor

The monitor panel can be attached to a wall, swing arm, or other mounting fixture.

NOTE: This apparatus is intended to be supported by UL or CSA or GS Listed wall mount bracket.

CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a thirdparty

mounting solution to the monitor, four 4mm diameter, 0.7 pitch, and 10 mm long screws (M4 x 10mm screws) are

required. Longer screws must not be used because they may damage the monitor. It is important to verify that

the manufacturer’s mounting solution is compliant with the VESA standard and is rated to support the weight of

the monitor display panel. For best performance, it is important to use the power and video cables provided with

the monitor.

1. Remove the monitor from the stand (see Removing the monitor stand on page 11).

2. Remove the four screws from the VESA holes located on the rear of the monitor.

3. To attach the monitor to a swing arm (sold separately), insert four 10mm screws through the holes on the

swing arm plate and into the mounting holes on the monitor.

NOTE: To attach the monitor to other mounting fixtures, follow the instructions included with the mounting

fixture to ensure that the monitor is safely attached.

4. Reconnect the cables to the monitor panel.

12 Chapter 3 Setting up the monitor

Questions and Answers:

Need help?

Do you have a question about the HP ProDisplay P222c and is the answer not in the manual?

General

3D	No
Panel type	VA
Pixel pitch	0.248 x 0.248 mm
Response time	9 ms
Display diagonal	21.5 \
Display technology	LED
Native aspect ratio	16:9
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	3000:1
Display number of colors	-
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080)
Tilt up angle range	-5 - 22 °
Certification	CE; CB; KC/KCC; NOM; PSB; ICE; TUV-S; ISO 9241-307; EAC; UL; CSA; PSB; ISC; CCC; CEL; CECP; SEPA; TCO Certified; ISC; VCCI; FCC; BSMI; Vietnam MEPS; Australian-New Zealand MEPS; WEEE; SmartWay Transport Partnership (NA)
Product color	Black
Country of origin	China
Market positioning	Business
RMS rated power	2 W
USB hub version	2.0
HDMI ports quantity	0
USB Type-A downstream ports quantity	3
AC input voltage	100 - 240 V
Power consumption (max)	37 W
Power consumption (standby)	0.5 W
Power consumption (typical)	24 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, DisplayPort, USB, VGA

Weight and Dimensions