To Next PageTo Next PageTo Previous PageTo Previous Page
Why is the power supply LED amber on my HP StorageWorks D2600 Storage?
If the power supply LED is amber on your HP Storage device, it might indicate that the power supply isn't properly inserted, has a damaged connector, or has failed. Ensure the power supply is undamaged and fully seated. Also, check that all pins on connectors and components are straight.
What to do if the enclosure front fault LED is amber on HP StorageWorks D2600 Storage?
If the front fault LED is amber on your HP Storage enclosure, it might be due to the Front Status and UID module not being inserted properly, having a damaged connector, or having failed. Ensure the Front Status and UID module is undamaged and fully seated. You may also check rear fault LEDs to isolate the failed component.
Why is the power on/standby button LED amber on my HP StorageWorks D2600?
If the power on/standby button LED is amber on your HP Storage, it might mean the button wasn't pressed firmly or held long enough. Firmly press and hold the power on/standby button for about three seconds. Also, ensure all components are fully seated.
How to fix HP StorageWorks D2600 Storage enclosure that does not initialize?
If the enclosure does not initialize, make sure that the power on/standby button was pressed firmly and held for approximately three seconds. Also, verify that the power on/standby button LED is green. Check the power supply LEDs to verify that the power supplies are working. If needed, remove and reinstall the power supplies to be sure they are seated properly. Remove and inspect AC power cords from both power supplies and reconnect them.
What does it mean when the enclosure rear fault LED is amber on HP StorageWorks D2600?
If the enclosure rear fault LED is amber on your HP Storage device, it could be that the rear power and UID module isn't properly inserted, has a damaged connector, or has failed. Ensure the rear power and UID module is undamaged and fully seated.
What to do if I/O module fault LED is amber on HP StorageWorks D2600 Storage?
If the I/O module fault LED is amber on your HP Storage, it could be because the I/O module is locked. Ensure the I/O module is seated properly by pressing it firmly into its bay after the handle has clicked in place.
What does it mean if the fan fault LED is amber on HP StorageWorks D2600?
If the fan fault LED is amber on your HP Storage, it might indicate that the fan isn't properly inserted, has a damaged connector, or has failed. Ensure the fan is undamaged and fully seated.
General| Interface | SAS |
|---|---|
| Host Interface | 6 Gb/s SAS |
| Redundant Power Supplies | Yes |
| Hot Plug Drives | Yes |
| Product Type | Disk Enclosure |
| Supported Drive Type | SAS, SATA |
| Rack Height | 2U |
| Cooling | Redundant fans |
| Drive Bays | 12 |
| RAID Support | Depends on the controller |
| Compatible Controllers | HP Smart Array P411, P812 |
| Power Supply | Two hot-plug, redundant power supplies |
| Weight | 48 lb (21.8 kg) (without drives) |
Details product models (SFF/LFF), lists enclosure components, and explains cascading.
Describes the front/rear views and drive bay numbering for SFF enclosures.
Describes the front/rear views and drive bay numbering for LFF enclosures.
Explains supported drive types, hot-plugging, and drive status LED indicators.
Provides physical dimensions (Height, Width, Depth) and weight of the enclosure.
Details operating temperature, humidity, altitude limits, and power requirements.
Outlines the sequence of installation steps for the disk enclosure.
Provides a step-by-step guide for installing disk drives into the enclosure bays.
Step-by-step instructions for powering up the disk enclosure and server.
Describes essential tasks for configuring the disk enclosure and storage.
Step-by-step instructions for powering up the disk enclosures correctly.
Procedures for safely powering down the disk enclosures.
Provides initial steps to diagnose and resolve enclosure startup failures, including LED checks.
Explains how to identify disk drive failures and their effects.
Information on how to contact HP technical support and find resellers.
