HP StorageWorks DAT Series User Manual

Action recommended
Additional
information
potential issues with the DAT 40 Hotplug drive
(Q1546A only). This problem is currently being
investigated and will be corrected in the next
revision of Library and Tape tools. This note will
be updated once the problem has been corrected
but until then do not use Library and Tape Tools
to diagnose issues with this product. This problem
only relates to the Q1546A product, no other DAT
40 variants are affected.
Back to Start of Section
Back to Top
Check if the drive is in OBDR mode (Tape Error and Clean LEDs flashing slowly)
Action recommended
Additional
information
Check if the drive is in OBDR mode (Tape Error and Clean
LEDs flashing slowly).
Click here for
information on the
HP DAT front panel
LEDs.
If OBDR mode is not required then power cycle the drive
to stop the OBDR function.
If the drive does not recovery properly, run the Device
Analysis Test in HP Library and Tape Tools (L&TT). Follow
any troubleshooting given with the test result.
NOTE:
Due to issues in development Library and Tape
Tools cannot be reliably used to diagnose potential
issues with the DAT 40 Hotplug drive (Q1546A
only). This problem is currently being investigated
and will be corrected in the next revision of Library
and Tape tools. This note will be updated once the
problem has been corrected but until then do not
use Library and Tape Tools to diagnose issues with
this product. This problem only relates to the
Q1546A product, no other DAT 40 variants are
affected.
Click here for
information on HP
Library and Tape
Tools.
Back to Start of Section
Back to Top
Run Device Analysis Test in L&TT
Action recommended
Additional
information

HP StorageWorks DAT Series Specifications

General

Brand	HP
Model	StorageWorks DAT Series
Category	Storage
Language	English