EasyManuals Logo
Home>HP>Desktop>t630 Thin Client

HP t630 Thin Client User Manual

HP t630 Thin Client
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Computer Setup—Security
NOTE: Support for specic Computer Setup options may vary depending on the hardware conguration.
Table A-1 Computer Setup—Security
Option Description
Setup Password Allows you to set and enable a setup (administrator) password.
NOTE: If the setup password is set, it is required to change Computer Setup options, ash the ROM, and
make changes to certain plug and play settings under Windows.
Power-On Password Allows you to set and enable a power-on password. The power-on password prompt appears after a power
cycle or reboot. If the user does not enter the correct power-on password, the unit will not boot.
Password Options
(This selection appears
only if a power-on
password or setup
password is set.)
Allows you to enable/disable:
Stringent Password – When set, enables a mode in which there is no physical bypass of the password
function. If enabled, removing the password jumper will be ignored.
Password Prompt on F9 & F12 – Default is enabled.
Setup Browse Mode – Allows viewing, but not changing, the F10 Setup Options without entering setup
password). Default is enabled.
Device Security Allows you to set Device Available/Device Hidden (default is ‘Device Available’) for:
System audio
Network controller
SATA0
SATA1
USB Security Allows you to set Enabled/Disabled (default is enabled) for:
Front USB Ports
USB Port 0
USB Port 1
USB Port 9
USB Port 10
Rear USB Ports
USB Port 2
USB Port 3
Accessory USB Ports
USB Port 8
Slot Security Allows you to disable the M.2 PCI Express slot. Default is enabled.
Slot 1 - M.2 PCIe x1
Network Boot Enables/disables the computer’s ability to boot from an operating system installed on a network server.
(Feature available on NIC models only; the network controller must be either a PCI expansion card or
embedded on the system board.) Default is enabled.
System IDs Allows you to set:
Asset tag (18-byte identier) – A property identication number assigned by the company to the
computer.
Ownership tag (80-byte identier)
Computer Setup (F10) Utilities 25

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP t630 Thin Client and is the answer not in the manual?

HP t630 Thin Client Specifications

General IconGeneral
BrandHP
Modelt630 Thin Client
CategoryDesktop
LanguageEnglish

Related product manuals