Table 10-2 Display specications
Metric U.S.
Active diagonal size 40.9 cm 16.1 in
Resolution 2560 × 1440 (QHD)
1920 × 1080 (FHD)
Surface treatment Antiglare
Brightness 250 nits
300 nits
Viewing angle UWVA
Backlight WLED
Display panel interface eDP
Solid-state drive specications
This section provides specications for your solid-state drives.
Table 10-3 Solid-state drive specications
256 GB* 512 GB* 1 TB*
Dimensions
Height 1.0 mm 1.0 mm 1.0 mm
Length 50.8 mm 50.8 mm 50.8 mm
Width 28.9 mm 28.9 mm 28.9 mm
Weight < 10 g < 10 g < 10 g
Interface type PCIe PCIe PCIe
Ready time, maximum (to not busy) 1.0 ms < 1.0 ms 1.0 ms
Access times, logical 0.1 ms 0.1 ms 0.1 ms
Transfer rate
Sequential read up to 2150 MB/s up to 2150 MB/s up to 2150 MB/s
Random read Up to 300,000 IOPs Up to 300,000 IOPs Up to 300,000 IOPs
Sequential write up to 1550 MB/s up to 1550 MB/s up to 1550 MB/s
Random write Up to 100,000 IOPs Up to 100,000 IOPs Up to 100,000 IOPs
Total logical sectors 468,883,296 1,000,215,216 1,500,336,388
Operating temperature 0°C to 70°C (32°F to 158°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
Actual drive specications might dier slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
Solid-state drive specications 75
To Next Page
Loading...
Need help?
General