HP XP P9500 Operation Guide

| LOCANY No UCB can reside in 31 bit storage |
| WLMPAV Yes Device supports work load manager |
| SHARED Yes Device shared with other systems |
| SHAREDUP No Shared when system physically partitioned |
| ***************************** Bottom of data ****************************** |
| |
| |
| F1=Help F2=Split F3=Exit F4=Prompt F5=Reset |
| F7=Backward F8=Forward F9=Swap F12=Cancel |
'-----------------------------------------------------------------------------'
17. When the Define Device to Operating System Configuration panel appears, press F3.
18. The Update Serial Number, Description and VOLSER panel now displays the device addresses.
To add more control units or device addresses, repeat the previous steps.
.---------- Update Serial Number, Description and VOLSER -----------.
| Row 1 of 128 |
| Command ===> _________________________________ Scroll ===> PAGE |
| |
| Device number . . : 8000 Number of devices : 128 |
| Device type . . . : 3390B |
| |
| Specify or revise serial number, description and VOLSER. |
| |
| Device Number Serial-# Description VOLSER |
| 8000 __________ 3390 Base addresses 8000-807F ______ |
| 8001 __________ 3390 Base addresses 8000-807F ______ |
| 8002 __________ 3390 Base addresses 8000-807F ______ |
| 8003 __________ 3390 Base addresses 8000-807F ______ |
| 8004 __________ 3390 Base addresses 8000-807F ______ |
| 8005 __________ 3390 Base addresses 8000-807F ______ |
| 8006 __________ 3390 Base addresses 8000-807F ______ |
| 8007 __________ 3390 Base addresses 8000-807F ______ |
| 8008 __________ 3390 Base addresses 8000-807F ______ |
| 8009 __________ 3390 Base addresses 8000-807F ______ |
| 800A __________ 3390 Base addresses 8000-807F ______ |
| F1=Help F2=Split F3=Exit F5=Reset F7=Backward |
| F8=Forward F9=Swap F12=Cancel |
'-------------------------------------------------------------------'
Defining the storage system to TPF
The storage system supports the IBM TPF and MPLF functions in either native mode or under VM.
MPLF support requires TPF version 4.1 or higher, and RAID-5+ and 3390-3/3R LVIs are supported.
The storage system's TPF/MPLF capability enables high levels of concurrent data access across
multiple channel paths. For further information on TPF and MPLF operations, see the IBM
documentation.
Defining the storage system to mainframe Linux
The storage system supports attachment to the following mainframe Linux operating systems:
• Red Hat Linux for S/390 and zSeries
• SuSE Linux Enterprise Server for IBM zSeries
For information on supported versions, Linux kernel levels, and other details, contact your HP
representative.
For information on preparing the storage system for Linux host attachment, see the IBM publication.
Mainframe operations
Initializing the LVIs
The storage system LVIs require only minimal initialization before being brought online. The following
shows an MVS ICKDSF JCL example of a minimal init job to write a VOLID and VTOC.
NOTE: PAV base and alias devices require additional definition. For further information, see the
HP StorageWorks P9000 for Compatible Parallel Access Volume User Guide.
// EXAMPLE JOB
// EXEC PGM=ICKDSF,PARM=NOREPLYU
//SYSPRINT DD SYSOUT=A
//SYSIN DD *
INIT UNITADDRESS (XXXX) VFY(*NONE*) VOLID(YYYYYY) -
28 Mainframe operations

HP XP P9500 Specifications

General

Brand	HP
Model	XP P9500
Category	Software
Language	English