HP Z38c User Manual

Setting up the monitor
To set up the monitor, ensure that the power is turned o to the monitor, computer system, and other
attached devices, then follow the instructions below.
NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the O position. The
master power switch turns o all power to the monitor.
Use caution when setting up the monitor
To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the panel may
cause nonuniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover
to its normal condition.
Attaching the monitor stand
CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause
damage.
Do not lay the monitor facedown when attaching the stand. Stress on the curvature of the display panel may
damage the panel if the monitor is placed facedown.
TIP: Consider the placement of the display, because the bezel might cause interfering reections from
surrounding light and bright surfaces.
1. Remove the stand from the box.
2. Insert the hooks at the top of the stand plate into the holes (1) on the back of the monitor.
3. Rotate the stand base up and toward the monitor (2) until the stand plate clicks into place.
Setting up the monitor 5

HP Z38c Specifications

General

3D	No
HD type	UltraWide Quad HD+
Pixel pitch	0.22908 x 0.22908 mm
Display diagonal	37.5 \
Display resolution	3840 x 1600 pixels
Display technology	LED
Native aspect ratio	21:9
Viewable size, vertical	366.5 mm
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Display number of colors	1.073 billion colors
Viewable size, horizontal	879.6 mm
Digital vertical frequency	24 - 76 Hz
Digital horizontal frequency	27 - 130 kHz
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1600 x 900, 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 1920 x 1600, 2560 x 1080, 2560 x 1600 (WQXGA)
On/off switch	Yes
USB hub version	3.2 Gen 1 (3.1 Gen 1)
USB upstream port type	USB Type-C
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	3
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	195 W
Annual energy consumption	93 kWh
Power consumption (standby)	0.5 W
Power consumption (typical)	80 W
Product color	Black
Country of origin	China
Market positioning	Business
Tilt angle range	-5 - 20 °
Number of OSD languages	10
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, ITA, JPN, POR

Weight and Dimensions

Depth (with stand)	248 mm
Height (with stand)	558.7 mm
Weight (with stand)	13800 g
Depth (without stand)	104.2 mm
Width (without stand)	895.5 mm
Height (without stand)	399.5 mm
Weight (without stand)	9800 g