To Next Page

To Previous Page

Mounting the monitor

The monitor panel can be attached to a wall, swing arm, or other mounting xture.

NOTE: This apparatus is intended to be supported by a UL- or CSA-Listed wall mount bracket.

CAUTION: This monitor supports the VESA industry-standard 100 mm mounting holes. To attach a third-

party mounting solution to the monitor, four 4 mm, 0.7 pitch, 10 mm long screws are required. Longer screws

must not be used because they may damage the monitor. It is important to verify that the manufacturer’s

mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor

display panel. For best performance, it is important to use the power and video cables provided with the

monitor.

Removing the monitor stand

CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned o and all cables are

disconnected.

Do not lay the monitor facedown when removing the stand. Stress on the curvature of the display panel may

damage the panel if the monitor is placed facedown.

1. Disconnect and remove all cables from the monitor.

2. Place the monitor on a level surface with the bottom of the stand facing up.

CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause

damage.

3. Press down on the release latch (1) and tilt the stand base away from the monitor (2).

4. Disengage the hooks at the top of the stand and lift the stand away from the monitor (3).

6 Chapter 1 Getting Started

Other manuals for HP Z38c

Questions and Answers:

Need help?

Do you have a question about the HP Z38c and is the answer not in the manual?

General

3D	No
HD type	UltraWide Quad HD+
Pixel pitch	0.22908 x 0.22908 mm
Display diagonal	37.5 \
Display resolution	3840 x 1600 pixels
Display technology	LED
Native aspect ratio	21:9
Viewable size, vertical	366.5 mm
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Display number of colors	1.073 billion colors
Viewable size, horizontal	879.6 mm
Digital vertical frequency	24 - 76 Hz
Digital horizontal frequency	27 - 130 kHz
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1600 x 900, 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 1920 x 1600, 2560 x 1080, 2560 x 1600 (WQXGA)
On/off switch	Yes
USB hub version	3.2 Gen 1 (3.1 Gen 1)
USB upstream port type	USB Type-C
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	3
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	195 W
Annual energy consumption	93 kWh
Power consumption (standby)	0.5 W
Power consumption (typical)	80 W
Product color	Black
Country of origin	China
Market positioning	Business
Tilt angle range	-5 - 20 °
Number of OSD languages	10
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, ITA, JPN, POR

Weight and Dimensions