To Next Page

To Previous Page

Turning on the monitor

1. Set the master power switch on the rear of the monitor to the On position.

2. Press the power button on the source device to turn it on.

3. Press the power button on the front of the monitor to turn it on.

CAUTION: Burn-in image damage may occur on monitors that display the same static image on the screen

for 12 consecutive hours of nonuse. To avoid burn-in image damage on the monitor screen, you should

always activate a screen saver application or turn o the monitor when it is not in use for a prolonged period

of time. Image retention is a condition that may occur on all LCD screens. Monitors with a “burned-in image”

are not covered under the HP warranty.

NOTE: If pressing the power button has no eect, the power button lockout feature may be enabled. To

disable this feature, press and hold the power button for 10 seconds.

NOTE: You can disable the power light in the OSD menu. Press the menu button on the monitor, select

Power Control, select Power LED, and then select O.

When the monitor is powered on, a Monitor Status message is displayed for ve seconds. The message shows

which input is the current active signal, the status of the auto-switch source setting (On or O; factory default

is On), the current preset screen resolution, and the recommended preset screen resolution.

The monitor automatically scans the signal inputs for an active input and uses that input.

HP watermark and image retention policy

The IPS monitor models are designed with IPS (in-plane switching) display technology which provides ultra-

wide viewing angles and advanced image quality. IPS monitors are suitable for a wide variety of advanced

image quality applications. This panel technology, however, is not suitable for applications that exhibit static,

stationary, or xed images for long periods of time without the use of screen savers. These types of

applications may include camera surveillance, video games, marketing logos, and templates that are

displayed on the screen for a prolonged period of time. Static images may cause image retention damage that

could look like stains or watermarks on the monitor's screen.

Setting up the monitor 13

Other manuals for HP Z38c

Questions and Answers:

Need help?

Do you have a question about the HP Z38c and is the answer not in the manual?

General

3D	No
HD type	UltraWide Quad HD+
Pixel pitch	0.22908 x 0.22908 mm
Display diagonal	37.5 \
Display resolution	3840 x 1600 pixels
Display technology	LED
Native aspect ratio	21:9
Viewable size, vertical	366.5 mm
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Display number of colors	1.073 billion colors
Viewable size, horizontal	879.6 mm
Digital vertical frequency	24 - 76 Hz
Digital horizontal frequency	27 - 130 kHz
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1600 x 900, 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 1920 x 1600, 2560 x 1080, 2560 x 1600 (WQXGA)
On/off switch	Yes
USB hub version	3.2 Gen 1 (3.1 Gen 1)
USB upstream port type	USB Type-C
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	3
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	195 W
Annual energy consumption	93 kWh
Power consumption (standby)	0.5 W
Power consumption (typical)	80 W
Product color	Black
Country of origin	China
Market positioning	Business
Tilt angle range	-5 - 20 °
Number of OSD languages	10
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, ITA, JPN, POR

Weight and Dimensions